Progettazione e Costruzione di Elettropompe Sommergibili
News Archive
Home Back

KUT-ALL NEW CUTTING SYSTEM

High-efficiency multichannel hydraulics cover almost all range of applications; designed to withstand extreme usage cycles (liquids with ropes, electrical cables, cans, plastic bottles, pieces of wood, etc.)... Continue...



NEW MULTI-CHANNEL HIGH EFFICIENCY

Faggiolati Pumps SpA continues its commitment to energy saving and to the resolution of the different application problems with the new multi-channel "high efficiency" hydraulics.... Continue...



NEW GENERATION GRINDER

The "grinder" impeller ( T Series ) is the hydraulic that allows to keep high levels of performance even in applications that require high discharge head and low capacity;  thanks to the "third generation" of grinder submersible pumps the resistance to clogging has improved .... Continue...



MATERIAL AND ENVIRONMENT

The difficulties faced in securing a high reliability standard are inherently connected with the nature of the liquids that, time by time, are being treated. The extreme variability of environmental conditions (pH either very low or very high, marine environment, oil and fuel presence) makes therefore impossible the identification ... Continue...



SPECIAL TREATMENTS

The treatment of industrial waste water can require several "special" products for heavy duty usag e and non-standard operating conditions. To prevent corrosion and abrasion, typical problems of these applications, Faggiolati proposes two special coatings.... Continue...



NEW MIXERS TESTING FACILITY

Faggiolati Pumps S.p.A., in order to maintain and ensure products always complying with the highest quality standards, to further match the customers’ expectations, has renovated and upgraded its system for mixers testing (always complying, as the previous one, with the strict ISO 21630).... Continue...



MIXER SERIES WITH MARINE IMPELLER

The new mixer series with marine impeller is based on the construction technology of all our submersible products. The new hydraulic component has been re-designed in order to obtain better performances in terms of mixing, thanks to a higher ratio thrust/absorbed power. This aspect allows a considerable saving of energy....Continue...



HYDRAULIC DN250 LT NO-CLOG

Open 3-channels impeller with high efficiency self-cleaning profile, joint with a wide free passage body pump, suitable for fluids containing high percentages of fibrous materials..

Continue...



CONTROL AND DATA DETECTION SYSTEM “Sapientino”

The control system 'Sapientino' represents the new Faggiolati device for the management and monitoring of pumping stations. Due to its touch-screen display and its user-friendly interface, the controller allows, in addition to easy programming and consultation... Continua...



REPLICAST STEEL CASTINGS

These are the first st. steel castings in the world realized in replicast. The serie of pumps X271 in AISI 316 ( we can cast them in duplex – astelloy alloy – and others alloys) WE HAVE PRODUCED THEM IN A FOUNDRY NEAR OUR FACTORY Our technical department has designed.... Continua...



NEW DIRECTIVE EUP 2005/32 EC

Submersible electric pumps of high energetic efficiency in conformity with European directive EuP (Energy-using Products) with a new subdivision of efficiency classes. Even though the correspondence is not completely precise and the motor characteristics are slightly different.... Continua...



COUPLING FEET DN 250

New quick coupling system DN 250. Strong and compact construction to minimize pit dimensions, complete with self-blocking gasket among coupling areas/surfaces for a perfect and long-lasting usage.... Continua...



NEW MODELS DN 350 - DN 400

Shafts (1) realized in stainless steel AISI 420B, grided down in ball bearings and mechanical seals seats, over-dimensioned respect to standard parameters of use.
Asynchronous, threephase electric motors (2), squirrel cage type, IP 68 protection, class H insulation.... Continua...



OSSI-MIX OMG410

Considering excellent results of OSSI MIX and OSSI MIX O2 system’s reliability and efficiency, it was decided to expand the range of these aerators with a more versatile and economical machine, especially in the use of small oxidation tanks. The main purpose of this machine is to be able to replace the current self-aspiratingi..... Continua...



CLEAN SEAL MIXER MODIFICATION

The continuous and well-established co-operation among Faggiolati Pumps S.p.A. and the Mechanical Department of University "La Sapienza" – Roma led to the realization of a seal chamber for our mixers able to protect mechanical seal from clogging problems. Starting from the experimental data provided by our R&D Department .... Continua...



PERMANENT MAGNETS

Analyzing the cost of an electric motor during its whole life, it costs 2- 3% for initial investment, 1,5% maintenance cost and more than 95% for electricity bill. For these reasons it's a REAL BUSINNESS to buy one of our machine with HIGH EFFICENCY motors (High Efficiency Electric Motor HEEMIE3 percentage according...... Continua...



ATEX RANGE UP TO 50 Kw

Faggiolati Pumps S.p.A. with a view of continuous expansion, supplying an ever-increasing range of highly advanced products, aimed at satisfying the real needs of the customer, is currently engaged in the certification of anti-explosion motors (ATEX)..... Continua...



GRINDER RANGE UP TO 25 kW

New range of submersible electric pumps with hydraulic endowed with grinding device, able to cut the solid parts in the fluid, making a mush which can be pumped also through small pipes. The cut particles will not be bigger than 10 mm in order to pass through the impeller .... Continua...



VORTEX PUMP WITH WIDE PASSAGE

New range of submersible pumps with recessed free vortex impeller, and installed in a pump case with wide and constant free passage to avoid clogging .... Continua...



KUT-ALL New Cutting System

H Series - high efficiency hydraulics

New generation Grinder

Material and Environment

Special Treatments

New mixers testing facility
Mixer GM17-GM18 marine propeller
DN250 LT no-clog hydraulic
"Sapientino" Control System
Replicast steel castings
High Efficiency Electric Motor
Coupling feet DN250

New Models DN 350 - DN 400
New Ossi-Mix OMG410
Clean Seal - Modification mixer
Permanent Magnets
Atex range up to 50 Kw
Grinder range up to 25 Kw
Vortex wide passage

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 


FAGGIOLATI PUMPS S.p.A.
Informazioni società
Z.Ind Sforzacosta - 62100 Macerata Italy - PI 01207900430 - Cap. Soc. € 3.000.000,00 int.vers.
Tel. +39 0733 205.601 r.a. - Fax +39 0733 203.258